Big discounting Electro Pneumatic Ball Valve - Trunnion Mounted Ball Valve – BVMC
Big discounting Electro Pneumatic Ball Valve - Trunnion Mounted Ball Valve – BVMC Detail:
Performance Specification
| Pressure | Testing pressure at constant temperature (MPa) | Applicable temperature | Applicable medium | |||
| The shell testing | High-pressure seal | Low-pressure seal | ||||
| Nominal rating pressure(PN) | 1.6 | 2.4 | 1.76 | 0.6 | -29~121℃ or upon the user requirement |
Natural gas,liquefied gas,coal gas,oil,water, requirement |
| 2.5 | 3.75 | 2.75 | 0.6 | |||
| 4.0 | 6.0 | 4.4 | 0.6 | |||
| 6.4 | 9.6 | 7.04 | 0.6 | |||
| 10.0 | 15.0 | 11.0 | 0.6 | |||
| 16.0 | 24.0 | 17.6 | 0.6 | |||
| Pressure classes(Class) | 150 | 2.94 | 2.16 | 0.6 | ||
| 300 | 7.67 | 5.62 | 0.6 | |||
| 400 | 10.2 | 7.48 | 0.6 | |||
| 600 | 15.3 | 11.23 | 0.6 | |||
| 900 | 23.0 | 16.85 | 0.6 | |||
| 1500 | 39.0 | 28.6 | 0.6 | |||
Technical Specification
| Design reference | GB | API | ASME | |
| Design standard | GB/T12237 | API6D | ASME B16.34 | |
| Structural length | Flanged ends | GB/T12221 |
API6D |
ASME B16.10 |
| Welded connection | GB/T12221 | |||
| Flanged ends | GB/T9113JB/T79 | ASME B16.5 | ||
| Butt-welding ends | GB/T12224 | ASME B16.25 | ||
| Test &inspection | GB/T13927 JB/T9092 | API6D | API598 | |
Note:The sizes of valve connecting flange and butt-welding terminas can be designed according to customer’s requirement.
Major Parts Material Form
| No. | Accessory name | Material | |
| GB | ASTM | ||
| 1 | Bonnet | WCB | A216-WCB |
| 2 | Nut | 45 | A194-2H |
| 3 | Bottom cover | 25 | A105 |
| 4 | Gasket | PTFE.Graphite + stainless steel | PTFE.Graphite |
| 5 | Screw | 35CrMoA | A193-B7 |
| 6 | Put the valve stem** | 1Cr13 | A276-410 |
| 7 | O Ring | NBR | NBR |
| 8 | Gasket | PTFE.Graphite + stainless steel | PTFE.Graphite |
| 9 | Body | WCB | A216-WCB |
| 10 | Blow down is filled in | 25 | A105 |
| 11 | Spring | Inconelx-750 | Inconelx-750 |
| 12 | Seat | 25+ENP | A105+ENP |
| 13 | Sealing ring | PTFE | PTFE |
| 14 | “O” Ring | NBR | NBR |
| 15 | Grease injection valve | Package | Package |
| 16 | Ball* | 25+ENP | A105+ENP |
| 17 | Stem** | 1Cr13 | A276-410 |
| 18 | Key | 45 | 1045 |
| 19 | Gasket | PTFE stainless steel | PTFE+304 |
| 20 | “O” Ring | NBR | NBR |
| 21 | Packing case | 25 | A105 |
| 22 | Screw | 35CrMoA | A193-87 |
| 23 | Packing seat | 1Cr13 | A276-410 |
| 24 | Packing | PTFE; Carbon fibre, soft graphite | |
| 25 | Packing gland | WCB | A216-WCB |
| 26 | Yoke | WCB | A216-WCB |
| 27 | Connection set | 45 | 1045 |
Note: The material of this part about the anti-sulphur typo valve is GB(12Cr18Ni9+ NIP)ASTM(A182-304+NIP).
The material of this part about the anti-sulphur type valve is GB(12Cr18Ni9)ASTM(A276-321).
Major parts of the valve series and materials of sealing surface differ according to actual working condition and customer’s special requirement.
Product detail pictures:
Related Product Guide:
Big discounting Electro Pneumatic Ball Valve - Trunnion Mounted Ball Valve – BVMC , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
New Fashion Design for Ball Valve With Locking ...
Product Information There are L port three-way ball valve and T Port Three Way Ball Valve. The T port three-way ball valve can help these three-orthogonality pipe connected with each other or shut off the third pipe, it is for distribution and gathering. L port three-way ball valve only can help to connect the two-orthogonality pipe. It is only working for distribution. Type: LWB (L Port) TWB (T Port) Design Specification: ASME B16.34, API 6D Nominal Diameter: DN15~DN500 (NPS1/2″~2...
-
Factory wholesale Long Stem Ball Valve - Float...
Performance Specification Pressure Testing pressure at constant temperature (MPa) Applicable temperature Applicable medium The shell testing High-pressure seal Low-pressure seal Nominal rating pressure(PN) 1.6 2.4 1.76 0.6 -29~121℃ or upon the user requirement Natural gas,liquefied gas,coal gas,oil,water, requirement 2.5 3.75 2.75 0.6 4.0 6.0 4.4 0.6 6.4 9.6 7.04 0.6 10.0 15.0 11.0 0.6 16.0 24.0 17.6 0.6 Pressure classes(Class) 150 2.94 2.16 0.6 300 7.67 5.62 0.6 400 10...
-
Online Exporter Forged Brass Gate Valve - Flat...
Introduction Through conduit valves are widely used for oil and gas pipeline service. This type of valve has such function that, when fully opened, media passage capability superior to valves in use for general secondary process line, it can also be capable for pig ball Cleaning service. BVMC through conduit gate valves are available in Slab Gate and Expanding Gate design and both are fully comply with API 6D standard. Slab Gate Valve Slab gate valve is simple in design but efficien...
-
OEM Customized Exhaust Check Valve - Pressure ...
Products Design Features Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media. The main structure features include: 1. The products feature a reasonable structure reliable seal good performance and nice modeling. 2. Either soft or hard seal can be selected for the product upon different workin...
-
Competitive Price for Full Gate Valve - High T...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sea...
-
2022 China New Design Api Butterfly Valve - H...
Body • The valve body shall be one piece cast or fabrication. • The body can be supplied with different types of materials in wafer, lug, or flanged and butt welding end connections to satisfy all installation requirements. Body Seat • The valve seat shall be integrated with the body. • Stellite or stainless steel shall be applied on the seating surfaces of valve body. • The valve seat is designed for inclined cone to ensure non-rubbing, non-jamming, bi-directional shutoff, and zero...