• banner2

Bottom price Spring Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Bottom price Spring Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC Detail:

Products Design Features

Products design features
• Dual plate or single plate
• Light-weight & compact design
• Spring loaded disc
• Resilient or Metal seated

Products Range
Size: 2”- 24”
Rating: ANSI 150lb-600lb
Body material: Cast steel , Stainless steel
End connection: RF, RTJ, B.W

Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media.

The main structure features include:
1.The products feature a reasonable structure reliable seal good performance and nice modeling
2. Either soft or hard seal can be selected for the product upon different working conditions The sealing face is built up with Co-based carbide alloy.leaving a better we-arability corrosion and scrap resistance and a longer duration
3. Small opening pressure,the disc can be opened fully with a very small pressure differential
4. Inside-set bolt-bearing structure reduces leakage and reliable use
5. PN>16.0MPa(Class 1500),the middle cavity uses a seal-tightening sealing structure to have the sealing performance reinforced
along with the pressure rise so as to ensure the sealing performance
6. Different parts materials and different sizes for flange, butt-welding are available for sensible combination according to different working facts and customers requirements

Products Performance Specification

cqwqwc

Technical Specification

Structural formation Butt-clamped lifting vertical type check valve
Design standard JB/T 8937
Face to face JB/T 8937
Flanged ends JB/T 79. GB/T9113. HG20592
Test & inspection GB/T 13927. JB/T 9092

Note: The sizes of valve connecting flange and butt-welding terminas can be designed according to customer’s requirement.

Major Parts Material Form

No. Part name Material
1 Body WCB CF8 CF8M CF8C CF3 CF3M
2 Disc WCB CF8 CF8M CF8C CF3 CF3M
3 Spring 4Cr13608i2Mn06Cr18Ni11Ti06Cr18Ni
4 Plate WCBCF8CF8MCF8CCF3、CF3M
5 Lock ring 4Cr13、60Si2Mn、06Cr18Ni11Ti、06Cr18Ni12Mo2Ti

Product detail pictures:

Bottom price Spring Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC detail pictures


Related Product Guide:

Bottom price Spring Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Leave Your Message

    Related products

    • Factory directly Industrial Gate Valve - Flanged Forged Steel Gate Valve – BVMC

      Factory directly Industrial Gate Valve - Flang...

      Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welde...

    • Bottom price Lined Ball Valve - Three Way Ball Valve – BVMC

      Bottom price Lined Ball Valve - Three Way Ball...

      Product Information There are L port three-way ball valve and T Port Three Way Ball Valve. The T port three-way ball valve can help these three-orthogonality pipe connected with each other or shut off the third pipe, it is for distribution and gathering. L port three-way ball valve only can help to connect the two-orthogonality pipe. It is only working for distribution. Type: LWB (L Port) TWB (T Port) Design Specification: ASME B16.34, API 6D Nominal Diameter: DN15~DN500 (NPS1/2″~2...

    • Factory making Lined Gate Valve - Threaded/Welded Forged Steel Gate Valve – BVMC

      Factory making Lined Gate Valve - Threaded/Wel...

      Products Design Features Stronger, Leakproof Body-bonnet Joint, Fully Encased Spiral Wound Gasket The design of the gasketed joint is critical. Its compression is better controlled in a fully enclosed cavity. Also, the possibility of unwinding of the SS spiral metal is eliminated. Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired po...

    • High Quality for Top Double Eccentric Semi-Ball Valve - Trunnion Mounted Ball Valve – BVMC

      High Quality for Top Double Eccentric Semi-Ball...

      Performance Specification Pressure Testing pressure at constant temperature (MPa) Applicable temperature Applicable medium The shell testing High-pressure seal Low-pressure seal Nominal rating pressure(PN) 1.6 2.4 1.76 0.6 -29~121℃ or upon the user requirement Natural gas,liquefied gas,coal gas,oil,water, requirement 2.5 3.75 2.75 0.6 4.0 6.0 4.4 0.6 6.4 9.6 7.04 0.6 10.0 15.0 11.0 0.6 16.0 24.0 17.6 0.6 Pressure classes(Class) 150 2.94 2.16 0.6 300 7.67 5.62 0.6 400 10...

    • Cheapest Price Full Flow Check Valve - Pressure Sealed Swing Type Check Valve – BVMC

      Cheapest Price Full Flow Check Valve - Pressur...

      Products Design Features Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media. The main structure features include: 1. The products feature a reasonable structure reliable seal good performance and nice modeling. 2. Either soft or hard seal can be selected for the product upon different workin...

    • High definition Groove Butterfly Valve -  High Performance Wafer Butterfly Valve – BVMC

      High definition Groove Butterfly Valve - High...

      Body • The valve body shall be one piece cast or fabrication. • The body can be supplied with different types of materials in wafer, lug, or flanged and butt welding end connections to satisfy all installation requirements. Body Seat • The valve seat shall be integrated with the body. • Stellite or stainless steel shall be applied on the seating surfaces of valve body. • The valve seat is designed for inclined cone to ensure non-rubbing, non-jamming, bi-directional shutoff, and zero...

    Leave Your Message