• banner2

Flat Gate Valve Parallel Slide valve

Short Description:

Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants.


Product Detail

Product Tags

Introduction

Through conduit valves are widely used for oil and gas pipeline service. This type of valve has such function that, when fully opened, media passage capability superior to valves in use for general secondary process line, it can also be capable for pig ball Cleaning service. BVMC through conduit gate valves are available in Slab Gate and Expanding Gate design and both are fully comply with API 6D standard.

Slab Gate Valve

Slab gate valve is simple in design but efficient in performance. This design utilizes two spring loaded floating seats which are pressure energized, moving the upstream seat in contact with the gate that brings about a tight and complete seal with both the upstream and downstream.

Technical Specification

Structural reference GB API
Design standard JB/T5298 GB/T19672 API6D
ASME B16.34
Structural length Flanged GB/T 12221
GB/T19672. JB/T5298
API6D
ASME B16.10
Welded connection GB/T12221 GB/T19672
Flanged ends GB/T9113 JB/T79 ASME B16.5 MSS SP44
Butt-welding ends GB/T 12224 ASMEB16.25
Test & inspection GB/T13927 JB/T9092 API6D API598

Note: The sizes of valve connecting flange can be designed according to customer's requirement.

Major Parts Material Form

 

No.

 

Part name

Material
    Ordinary type Anti-sulphur type
    GB ASTM GB ASTM
1 Blow down stops 25+Zn A105+Zn 12Cr18Ni9 A276-304
2 Grease injection joint 25+Zn A105+Zn 25+Zn A105+Zn
3 Body  WCB A216-WCB WCB A216-WCB
4 Disc  16Mn+ENP A105+ENP 12Cr18Ni9 A276-304
5 Seat  16Mn+PTFE  A105+PTFE 12Cr18Ni9+PTFE A276-304+PTFE
6 O-ring NBR NBR FPM FPM
7 Stem  2Cr13 A276-420  12Cr18Ni9 A276-304
8 Packing seat  2Cr13 A276-420 2Cr13  A276-420
9 Y” ring NBR NBR FPM FPM
10 Sealing shroud 20Cr13 A276-420 2Cr13 A276-420
11 Indicating stem 12Cr18Ni9 A276-304 12Cr18Ni9 A276-304
12 Gasket Graphite+1Cr18N9

Graphite+304

Graphite+1Cr18N9  Graphite+304
13 Bonnet  WCB

A216-WCB

WCB

A216-WCB

14 Stud  35CrMoA A193-B7 35CrMoA A193-B7
15 Nut 45 A194-2H 45  A194-2H
16 Yoke WCB  A216-WCB  WCB A216-WCB

  • Previous:
  • Next:

  • Leave Your Message

    Related products

    • Bolted Bonnet OS&Y Gate Valve

      Bolted Bonnet OS&Y Gate Valve

      Products Design Features Products design features • Stellited seating surface • Low emission control • Flexible wedge • Full guiding • Absolute bonnet joint leak proof • Optional by-pass design, Y Style Globe Valve, Check Valve. Products Range Size: 2”-24” Rating: ANSI 600lb-2500lb Body material: Carbon steel , Chromium Moly Alloy steel Trim: Per API 600 Operation: Handwheel, Gear, Motor actuator Flanged ends cast steel gate valve are used to ...

    • Knife type Gate Valve Stainless Steel

      Knife type Gate Valve Stainless Steel

      Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...

    • Threaded/Welded Forged Steel Gate Valve

      Threaded/Welded Forged Steel Gate Valve

      Products Design Features The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sealing surface, which is wearing resistant erosion proof, abrasion proof and long-lived. 3.The surface and the adjusting media of the valve shaft are nitrogenized so that it ...

    • High Temperature and High Pressure Electric Power Station Gate Valve

      High Temperature and High Pressure Electric Pow...

      Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...

    • Low temperature Gate Valve

      Low temperature Gate Valve

      Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...

    • Threaded/Welded Forged Steel Gate Valve

      Threaded/Welded Forged Steel Gate Valve

      Products Design Features Stronger, Leakproof Body-bonnet Joint, Fully Encased Spiral Wound Gasket The design of the gasketed joint is critical. Its compression is better controlled in a fully enclosed cavity. Also, the possibility of unwinding of the SS spiral metal is eliminated. Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in o...

    Leave Your Message