Good Quality Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC
Good Quality Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC Detail:
Products Design Features
Products design features
• Dual plate or single plate
• Light-weight & compact design
• Spring loaded disc
• Resilient or Metal seated
Products Range
Size: 2”- 24”
Rating: ANSI 150lb-600lb
Body material: Cast steel , Stainless steel
End connection: RF, RTJ, B.W
Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media.
The main structure features include:
1.The products feature a reasonable structure reliable seal good performance and nice modeling
2. Either soft or hard seal can be selected for the product upon different working conditions The sealing face is built up with Co-based carbide alloy.leaving a better we-arability corrosion and scrap resistance and a longer duration
3. Small opening pressure,the disc can be opened fully with a very small pressure differential
4. Inside-set bolt-bearing structure reduces leakage and reliable use
5. PN>16.0MPa(Class 1500),the middle cavity uses a seal-tightening sealing structure to have the sealing performance reinforced
along with the pressure rise so as to ensure the sealing performance
6. Different parts materials and different sizes for flange, butt-welding are available for sensible combination according to different working facts and customers requirements
Products Performance Specification
Technical Specification
| Structural formation | Butt-clamped lifting vertical type check valve |
| Design standard | JB/T 8937 |
| Face to face | JB/T 8937 |
| Flanged ends | JB/T 79. GB/T9113. HG20592 |
| Test & inspection | GB/T 13927. JB/T 9092 |
Note: The sizes of valve connecting flange and butt-welding terminas can be designed according to customer’s requirement.
Major Parts Material Form
| No. | Part name | Material |
| 1 | Body | WCB CF8 CF8M CF8C CF3 CF3M |
| 2 | Disc | WCB CF8 CF8M CF8C CF3 CF3M |
| 3 | Spring | 4Cr13608i2Mn06Cr18Ni11Ti06Cr18Ni |
| 4 | Plate | WCBCF8CF8MCF8CCF3、CF3M |
| 5 | Lock ring | 4Cr13、60Si2Mn、06Cr18Ni11Ti、06Cr18Ni12Mo2Ti |
Product detail pictures:
Related Product Guide:
Good Quality Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Manufactur standard Epdm Seal Butterfly Valve -...
Body • The valve body shall be one piece cast or fabrication. • The body can be supplied with different types of materials in wafer, lug, or flanged and butt welding end connections to satisfy all installation requirements. Body Seat • The valve seat shall be integrated with the body. • Stellite or stainless steel shall be applied on the seating surfaces of valve body. • The valve seat is designed for inclined cone to ensure non-rubbing, non-jamming, bi-directional shutoff, and zero...
-
Bottom price Spring Check Valve - Butt-Clamped...
Products Design Features Products design features • Dual plate or single plate • Light-weight & compact design • Spring loaded disc • Resilient or Metal seated Products Range Size: 2”- 24” Rating: ANSI 150lb-600lb Body material: Cast steel , Stainless steel End connection: RF, RTJ, B.W Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power...
-
Reasonable price Slip Gate Valve - Low tempera...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welde...
-
2022 wholesale price Threaded Gate Valve - Hig...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sea...
-
Best Price on Stainless Globe Valve - High Vol...
Products Design Features Globe valve are used to cut or connect the pipe media under nominal pressure betweenPN1.6-160MPa(Class150-2500) working temperaturess600C.in oil industry chemical industry pharmaceuticals fertilizer and power industry. The main structure features include: 1. Rational structure.reliable sealing excellent performance pretty appearance 2. Co-radix alloy welded sealing surface anti-wearing erosion-proof abrasion-proof and longer use life. 3. The surface and the adjusting ...
-
OEM/ODM China Reduced Bore Ball Valve - Turbin...
Product Information Four-way ball valve also known as four way circulating valve, at present, this valve is mainly supplied to clockwise and counterclockwise circulating water supply system of cooler device on power station. The conventional piping design for clockwise and counterclockwise circulating water supply is use a huge device, which with higher cost and frequently operation. Choose four way circulating valve to replace these complex piping system and valves, has simply the proce...