High reputation Lockable Ball Valve - Turbine Four Way Ball Valve – BVMC
High reputation Lockable Ball Valve - Turbine Four Way Ball Valve – BVMC Detail:
Product Information
Four-way ball valve also known as four way circulating valve, at present, this valve is mainly supplied to clockwise and counterclockwise circulating water supply system of cooler device on power station. The conventional piping design for clockwise and counterclockwise circulating water supply is use a huge device, which with higher cost and frequently operation. Choose four way circulating valve to replace these complex piping system and valves, has simply the procedure, easier the operation, lower the cost, easy to control and good in synchronization.
Type: FWB
Design Specification: ASME B16.34, API 6D
Nominal Diameter: DN15~DN500 (NPS 1/2″~NPS 20)
Pressure Rating: PN1.6MPa~PN25.0MPa (Class 150~Class1500)
Performance Features
Four seats four-way ball valve, the flow passage is T Port or L Port, it is depending on the working condition
Four-way ball valve is designed as a floating ball valve or trunnion mounted ball valve
Actuator: Handle Operated, Gear Worm, Electrical Actuator, Pneumatic Actuator etc.
Product detail pictures:
Related Product Guide:
High reputation Lockable Ball Valve - Turbine Four Way Ball Valve – BVMC , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Factory making Lined Gate Valve - Flat Gate Va...
Introduction Through conduit valves are widely used for oil and gas pipeline service. This type of valve has such function that, when fully opened, media passage capability superior to valves in use for general secondary process line, it can also be capable for pig ball Cleaning service. BVMC through conduit gate valves are available in Slab Gate and Expanding Gate design and both are fully comply with API 6D standard. Slab Gate Valve Slab gate valve is simple in design but efficien...
-
New Delivery for Stainless Steel Angle Globe Va...
Products Design Features Globe valve are used to cut or connect the pipe media under nominal pressure betweenPN1.6-160MPa(Class150-2500) working temperaturess600C.in oil industry chemical industry pharmaceuticals fertilizer and power industry. The main structure features include: 1. Rational structure.reliable sealing excellent performance pretty appearance 2. Co-radix alloy welded sealing surface anti-wearing erosion-proof abrasion-proof and longer use life. 3. The surface and the adjusting ...
-
PriceList for Duplex Check Valve - Pressure Se...
Products Design Features Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media. The main structure features include: 1. The products feature a reasonable structure reliable seal good performance and nice modeling. 2. Either soft or hard seal can be selected for the product upon different workin...
-
Online Exporter Forged Brass Gate Valve - High...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sea...
-
High Quality Manual Ball Valve - Three-piece S...
Performance Specification Pressure Testing pressure at constant temperature (MPa) Applicable temperature Applicable medium The shell testing High-pressure seal Low-pressure seal Nominal rating pressure(PN) 1.6 2.4 1.76 0.6 -29~121℃ or upon the user requirement Natural gas,liquefied gas,coal gas,oil,water, requirement 2.5 3.75 2.75 0.6 4.0 6.0 4.4 0.6 6.4 9.6 7.04 0.6 10.0 15.0 11.0 0.6 16.0 24.0 17.6 0.6 Pressure classes(Class) 150 2.94 2.16 0.6 300 7.67 5.62 0.6 400 10...
-
OEM/ODM Supplier Liquid Check Valve - Butt-Cla...
Products Design Features Products design features • Dual plate or single plate • Light-weight & compact design • Spring loaded disc • Resilient or Metal seated Products Range Size: 2”- 24” Rating: ANSI 150lb-600lb Body material: Cast steel , Stainless steel End connection: RF, RTJ, B.W Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power...