Hot-selling Steam Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC
Hot-selling Steam Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC Detail:
Products Design Features
Products design features
• Dual plate or single plate
• Light-weight & compact design
• Spring loaded disc
• Resilient or Metal seated
Products Range
Size: 2”- 24”
Rating: ANSI 150lb-600lb
Body material: Cast steel , Stainless steel
End connection: RF, RTJ, B.W
Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media.
The main structure features include:
1.The products feature a reasonable structure reliable seal good performance and nice modeling
2. Either soft or hard seal can be selected for the product upon different working conditions The sealing face is built up with Co-based carbide alloy.leaving a better we-arability corrosion and scrap resistance and a longer duration
3. Small opening pressure,the disc can be opened fully with a very small pressure differential
4. Inside-set bolt-bearing structure reduces leakage and reliable use
5. PN>16.0MPa(Class 1500),the middle cavity uses a seal-tightening sealing structure to have the sealing performance reinforced
along with the pressure rise so as to ensure the sealing performance
6. Different parts materials and different sizes for flange, butt-welding are available for sensible combination according to different working facts and customers requirements
Products Performance Specification
Technical Specification
| Structural formation | Butt-clamped lifting vertical type check valve |
| Design standard | JB/T 8937 |
| Face to face | JB/T 8937 |
| Flanged ends | JB/T 79. GB/T9113. HG20592 |
| Test & inspection | GB/T 13927. JB/T 9092 |
Note: The sizes of valve connecting flange and butt-welding terminas can be designed according to customer’s requirement.
Major Parts Material Form
| No. | Part name | Material |
| 1 | Body | WCB CF8 CF8M CF8C CF3 CF3M |
| 2 | Disc | WCB CF8 CF8M CF8C CF3 CF3M |
| 3 | Spring | 4Cr13608i2Mn06Cr18Ni11Ti06Cr18Ni |
| 4 | Plate | WCBCF8CF8MCF8CCF3、CF3M |
| 5 | Lock ring | 4Cr13、60Si2Mn、06Cr18Ni11Ti、06Cr18Ni12Mo2Ti |
Product detail pictures:
Related Product Guide:
Hot-selling Steam Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
OEM Supply Slurry Knife Gate Valve - Threaded/...
Products Design Features The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sealing surface, which is wearing resistant erosion proof, abrasion proof and long-lived. 3.The surface and the adjusting media of the valve shaft are nitrogenized so that it is erosion and abrasion resistant. 4.PN≥15.0M...
-
Cheap PriceList for Air Actuated Knife Gate Val...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welde...
-
New Fashion Design for High Temp Check Valve -...
Products Design Features Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media. The main structure features include: 1. The products feature a reasonable structure reliable seal good performance and nice modeling. 2. Either soft or hard seal can be selected for the product upon different workin...
-
Best Price on Cast Iron Knife Gate Valve - Fla...
Introduction Through conduit valves are widely used for oil and gas pipeline service. This type of valve has such function that, when fully opened, media passage capability superior to valves in use for general secondary process line, it can also be capable for pig ball Cleaning service. BVMC through conduit gate valves are available in Slab Gate and Expanding Gate design and both are fully comply with API 6D standard. Slab Gate Valve Slab gate valve is simple in design but efficien...
-
Factory directly Extended Stem Ball Valve - Hi...
ANTI-STATIC Design The electrical conductance continuity between all the metallic components is guaranteed and certified. Performance Specification Pressure Testing pressure at constant temperature (MPa) Applicable temperature Applicable medium The shell testing High-pressure seal Low-pressure seal Nominal rating pressure(PN) 1.6 2.4 1.76 0.6 -29~121℃ or upon the user requirement Natural gas,liquefied gas,coal gas,oil,water, requirement 2.5 3.75 2.75 0.6 ...
-
Professional China Hydraulic Butterfly Valve -...
Body • The valve body shall be one piece cast or fabrication. • The body can be supplied with different types of materials in wafer, lug, or flanged and butt welding end connections to satisfy all installation requirements. Body Seat • The valve seat shall be integrated with the body. • Stellite or stainless steel shall be applied on the seating surfaces of valve body. • The valve seat is designed for inclined cone to ensure non-rubbing, non-jamming, bi-directional shutoff, and zero...