• banner2

New Arrival China High Pressure Ball Valve - High Performance Orbit Ball Valve – BVMC

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
New Arrival China High Pressure Ball Valve - High Performance Orbit Ball Valve – BVMC Detail:

Product Information

Design Specification: API 6D, ANSI B16.34
Nominal Diameter: DN15~DN600 (NPS 1″~NPS 24)
Pressure Rating: PN1.6~PN42 0MPa (Class 150~Class2500)
Actuator: Manual Operated, Electrical Actuator, Pneumatic Actuator etc

Product Description

The Orbit Ball Valve utilize the interaction of the sloping surface on the bottom of the stem and spiral groove for the core tilting and rotation. When orbit ball valve begins to opening, the core tilt away from the seat, the line flow passes uniformly around the core face, which reduced the seat wear and erosion from high velocity flow, the core then rotates to the fully open position. In the orbit valve close position, the angled flat surface on the lower stem to mechanically wedge the core tightly against the seat, and generate a needed sealing pressure to ensure the reliable sealing.
CONVISTA’s Orbit Ball Valve is ideally suited for severe application when Big Differential Operation Pressure Happens, Frequently Operation, Pressure and Temperature Differential Request Valve Good Sealing In Long Term or application Not Allowed Downtime Maintenance or Replace Valve Such As: Gas Metering Station, The Outlet And Inlet Of Compressor Station, Suction Of Storage Tank, Emergency Shutdown Application or Hydrogen Service.

Single Seat Design Mandatory Seal, Ensure Valve with Bi-directional Sealing Function
Tilting Core, Mechanical Lifting Stem: No Abrasion When Valve Opening nor Closing, Low Torque Operation
Mechanical Wedge: The angled flat surface on the lower stem provides mechanical wedge tight force to ensure the continuously tight seal.
Dual Stem Guides: Hardened stem slots and tough guide pins control the lift-and-turn action of the stem. So that to control of the ball and meet no abrasion when open or closing function.
Self-cleaning Function: When tilting the core away from the seat. The flow around 360 degree of the core face to clean the foreign material away from the ball and seat.


Product detail pictures:


Related Product Guide:

New Arrival China High Pressure Ball Valve - High Performance Orbit Ball Valve – BVMC , The product will supply to all over the world, such as: , , ,

5 Stars By from -

5 Stars By from -
Leave Your Message

Related products

  • Hot New Products Hand Ball Valve - Three Way Ball Valve – BVMC

    Hot New Products Hand Ball Valve - Three Way B...

    Product Information There are L port three-way ball valve and T Port Three Way Ball Valve. The T port three-way ball valve can help these three-orthogonality pipe connected with each other or shut off the third pipe, it is for distribution and gathering. L port three-way ball valve only can help to connect the two-orthogonality pipe. It is only working for distribution. Type: LWB (L Port) TWB (T Port) Design Specification: ASME B16.34, API 6D Nominal Diameter: DN15~DN500 (NPS1/2″~2...

  • Factory Supply Offset Butterfly Valve -  High Performance Wafer Butterfly Valve – BVMC

    Factory Supply Offset Butterfly Valve - High ...

    Body • The valve body shall be one piece cast or fabrication. • The body can be supplied with different types of materials in wafer, lug, or flanged and butt welding end connections to satisfy all installation requirements. Body Seat • The valve seat shall be integrated with the body. • Stellite or stainless steel shall be applied on the seating surfaces of valve body. • The valve seat is designed for inclined cone to ensure non-rubbing, non-jamming, bi-directional shutoff, and zero...

  • OEM Manufacturer Air Operated Ball Valve - Welded Soft Sealing Ball Valve – BVMC

    OEM Manufacturer Air Operated Ball Valve - Wel...

    Performance Specification Pressure Testing pressure at constant temperature (MPa) Applicable temperature Applicable medium The shell testing High-pressure seal Low-pressure seal Nominal rating pressure(PN) 1.6 2.4 1.76 0.6 -29~121℃ or upon the user requirement Natural gas,liquefied gas,coal gas,oil,water, requirement 2.5 3.75 2.75 0.6 4.0 6.0 4.4 0.6 6.4 9.6 7.04 0.6 10.0 15.0 11.0 0.6 16.0 24.0 17.6 0.6 Pressure classes(Class) 150 2.94 2.16 0.6 300 7.67 5.62 0.6 400 10...

  • OEM Customized Right Angle Globe Valve - High Voltage Electric Power Station Globe Valve – BVMC

    OEM Customized Right Angle Globe Valve - High ...

    Products Design Features Globe valve are used to cut or connect the pipe media under nominal pressure betweenPN1.6-160MPa(Class150-2500) working temperaturess600C.in oil industry chemical industry pharmaceuticals fertilizer and power industry. The main structure features include: 1. Rational structure.reliable sealing excellent performance pretty appearance 2. Co-radix alloy welded sealing surface anti-wearing erosion-proof abrasion-proof and longer use life. 3. The surface and the adjusting ...

  • Chinese Professional Heavy Duty Ball Valve - Automatic Trunnion Mounted Ball Valve – BVMC

    Chinese Professional Heavy Duty Ball Valve - A...

    Product Information Type: EFB Type Design Specification: API 6D, API 608, BS 5351.ANSI B16.34 Nominal Diameter: DN100~DN1200 (NPS 4″~NPS 48″) Pressure Rating: PN1.6MPa~PN42 MPa (Class150~Class2500) Actuator: Manual Operated, Electrical Actuator, Pneumatic Actuator, Pneumatic Hydraulic Actuator etc Product Description For different application, the trunnion mounted ball valve body can use: carbon steel, stainless steel, low temperature steel, anti-sulfur material. CONVIST...

  • Professional China Hydraulic Butterfly Valve -  High Performance Wafer Butterfly Valve – BVMC

    Professional China Hydraulic Butterfly Valve -...

    Body • The valve body shall be one piece cast or fabrication. • The body can be supplied with different types of materials in wafer, lug, or flanged and butt welding end connections to satisfy all installation requirements. Body Seat • The valve seat shall be integrated with the body. • Stellite or stainless steel shall be applied on the seating surfaces of valve body. • The valve seat is designed for inclined cone to ensure non-rubbing, non-jamming, bi-directional shutoff, and zero...

Leave Your Message